Follow these instructions to install and configure the advanced driver print via the ePrint system.  Using the advanced driver method will allow you extra management options for your documents as they are printed.  

Instructions are available for CornellPooledMFP-Black on Windows, CornellPooledMFP-Color on Windows,  CornellPooledMFP-Black on MacCornellPooledMFP-Color on MacCornellPooledMFP-Black on Linux and CornellPooledMFP-Color on Linux.


Instructions for CornellPooledMFP-Black on Windows

  • Download the Xerox Global Print PS driver from here
  • Extract the zip file
  • Run the X-GPD_5.496.7.0_PS_x64B.exe file from your Downloads folder
  • Accept the terms and conditions, then choose a folder where you'd like to extract the driver files.  C:\Xerox is the default location; take note of the folder for use when installing the printer
    • In this example, the drivers are extracted to C:\Xerox\UNIV_5.496.7.0_PS_x64_Driver.infxeroxWindows
  • Click Install
  • If you are prompted to allow Xerox Windows Elevated Privileges Executable to run, choose No
  • When installing the printer through ePrint, choose Have Disk and navigate to your extracted files location - for example C:\Xerox\UNIV_5.496.7.0_PS_x64_Driver.inf
  • Choose the x2DBRIP file and click Open followed by OKxeroxhavedisk
  • Select the Xerox WorkCentre 5945 PS option and click OK

Back to Top


Instructions for CornellPooledMFP-Color on Windows

  • Download the Xerox 7845 PS driver pack from here
  • Extract the zip file
  • Run the WC78XX_5.433.16.0_PS_x64.exe file from your Downloads folder
  • Accept the terms and conditions, then choose a folder where you'd like to extract the driver files.  C:\Xerox is the default location; take note of the folder for use when installing the printer
    • In this example, the drivers are extracted to C:\Xerox\WC78XX_5.433.16.0_PS_x64_Driver.inf
    • 7845-install
  • Click Install
  • If you are prompted to allow Xerox Windows Elevated Privileges Excutable to run, choose No
  • When installing the printer through ePrint, choose Have Disk and navigate to your extracted files location - for example C:\Xerox\WC78XX_5.433.16.0_PS_x64_Driver.inf
  • Choose the x2DSPYP file and click Open followed by OKxeroxhavedisk
  • Select the Xerox WorkCentre 7845 PS option and click OK

Back to Top


Instructions for CornellPooledMFP-Black on Mac

  • Download the Xerox WorkCentre driver package from here
  • Extract the zip file
  • Double-click the XeroxPrintDriver.3.68.0_1623.dmg file from your Downloads
  • Launch the Xerox Print Driver 3.68.0.pkg file
  • Navigate through the installation wizard
  • At the end of the wizard, you'll be prompted to select a printer
  • Click Continue, then Continue again (we will install the printer during ePrint setup)
    • continue
  • Close the wizard

When installing the printer through ePrint

  • Click the Use: dropdown
  • Click Select Software
  • In the popup box, type 5945 in the Filter search box
  • Click Xerox WorkCentre 5945, 3.68.0 option and click OK
  • Click Add
  • Click Configure, then OK.  The default options are fine.

Back to Top


Instructions for CornellPooledMFP-Color on Mac

  • Download the Xerox WorkCentre driver package from here
  • Extract the zip file
  • Double-click the XeroxPrintDriver.3.68.0_1623.dmg file from your Downloads
  • Launch the Xerox Print Driver 3.68.0.pkg file
  • Navigate through the installation wizard
  • At the end of the wizard, you'll be prompted to select a printer
  • Click Continue, then Continue again (we will install the printer during ePrint setup)
    • continue
  • Close the wizard

When installing the printer through ePrint

  • Click the Use: dropdown
  • Click Select Software
  • In the popup box, type 7845 in the Filter search box
  • Click Xerox WorkCentre 7845, 3.68.0 option and click OK
  • Click Add
  • Click Configure, then OK.  The default options are fine.

Back to Top


Instructions for CornellPooledMFP-Black on Linux

  • Download the Xerox WorkCentre driver ppd from here
  • Extract the zip file
  • Put the xrx5945.ppd file somewhere you will remember it.
  • Use the ppd in the Add Printer dialogue in System Settings. (instructions coming later)
  • Close the wizard

When installing the printer through ePrint

  • Click Choose File under Provide PPD File
  • Navigate to xrx5945.ppd
  • Click Add Printer

Back to Top


Instructions for CornellPooledMFP-Color on Linux

  • Download the Xerox WorkCentre driver ppd from here
  • Extract the zip file
  • Put the xrx7855.ppd file somewhere you will remember it.
  • Use the ppd in the Add Printer dialogue in System Settings. (instructions coming later)
  • Close the wizard

When installing the printer through ePrint

  • Click Choose File under Provide PPD File
  • Navigate to xrx7855.ppd
  • Click Add Printer

Back to Top