Connecting to a Network P-Copier

Follow these instructions to connect to Cornell's campus pooled printers. You must have your Student ID to use the P-Copiers. If you are connected via CornellWireless, you must be properly authenticated to SafeConnect to print to the campus pooled printers.

Download and install the Sharp AR-M355N drivers. 

1. Click here to download the drivers.
2. Double-click on the zip file to extract it.
3. Double-click on Jupiter-1001-OSX10.5.dmg to start the install process.
4. Double-click on AR-PK6
5. Click Continue
6. To agree to license click Continue
7. Click Agree
8. Select destination drive
9. Click Continue
10. Click Install
11. Type in your administrator password
12. Click OK
13. Click Close to finish the driver installation

Install Printer 

1. Open Print & Fax from the System Preferences panel
2. Click the plus sign at the lower left corner of the window to add a printer
3. If 10.5: Control-Click More Printers in the toolbar
4. If 10.6: Control-Click anywhere in the toolbar
5. Click Customize Toolbar
6. Control-Click Advanced
7. Click Add "Advanced"
8. Click Done to exit the Customize Toolbar menu
9. Click Advanced, you will need to wait a few seconds while the menus populate.
10. Type: Windows
11. Device: Another Device
12. In the URL field, please use the following format:
    smb://username:password@cornellcollege.edu/print.cornellcollege.edu/CampusPooledPrinters
    • Please substitute your Cornell user name for "username" and your password for "password".
13. In the Name field, type CampusPooledPrinters
14. Location can be left blank.
15. If 10.5: In the Print Using field, click Select a driver to use...
16. If 10.6: In the Print Using field, click Select Printer Software...
    
17. Click Sharp AR-M355N PPD
18. Click Add to finish the installation
19. Installable Options for printer.
    • Input Tray Options - 3 Tray Desk
    • Duplex Module – Installed
    • Bypass Tray – Installed
    • Output Tray Options (Right) – Finisher
    • Saddle Stitch Finisher – Not Installed
    • Punch Module – None
    • Installed RAM – 384MB RAM
    • Hard Disk Drive – Installed
20. Click Continue to finish.

You have just installed the printer named "CornellPooledPrinters" which will give you access to several printers/copiers on campus. Printing to this device will allow your jobs to be retrieved at any of the following printers:

• College Hall 1st Floor
• Commons 1st Floor
• Law Hall 1st Floor
• Library 1st Floor
• Library 2nd Floor
• Library 3rd Floor
• Old Sem 2nd Floor 
• Bowman-Carter Campus Safety Office

Other Available Printers

The following is a full list of printers that are available for student use. These printers can easily be installed using the instructions for CampusPooledPrinters as your example. Each printer is followed by it's model number. Drivers for each model can be downloaded from either of the following locations.

www.hp.com
www.sharpusa.com

*Signifies printers available 24 hours a day, 7 days a week.

If you have any questions about connecting to the P-Copiers or need help installing any drivers, please contact the Information Technology Help Desk at extension 4357 or submit a Work Order Request and our staff will assist you as soon as possible.